Linear actuator EA-L-1000/750-02
24 V DC / 1 A / 1000 N / 750 mm strokeThe linear actuator EA-L is an electromechanical actuator for opening and closing windows and flaps. The movement is linear via a spindle thrust tube. The actuator is located in an aluminum tube with an integrated multifunctional groove for individual fastening and concealed cable routing. The electronic load cut-off with microcontroller is integrated in the actuator and thus prevents an overload in the end positions. End position detection and feedback via potential controlled F-contact. Tested according to DIN EN 12101-2 for SHEV application with retriggering blockage.Technical data:
Rated voltage: 24 V DC /±15%
Rated current: 1 A
Switch-on duration: 30% (ON: 3 min / OFF: 7 min)
Push force: 1000 N
Pulling force: 1000 N
Nominal locking force: 1200 N
Stroke length: 750 mm
Running speed: 5 mm/s
Protection class: IP54
Temperature range: -5°C to +75°C
Housing: aluminium profile tube anodized in EV1
Housing type: Aluminium
Connection cable: silicone cable 3 x 0.75 mm², light grey, length 3,000 mm
Dimensions (LxWxH): 1113 x 36 x 42 mm
Sound level: < 70 dB (A)
Weight: 2.85 kgOptions:
– Coating according to RAL or DBManufacturer:
SIMON PROtec Systems GmbH
Type: Linear actuator EA-L-1000/750-02
Article number: M2 1713
£293.80
The linear actuator EA-L 1000 / 750-02 is housed in a special aluminum tube with integrated multi-functional groove, allowing flexible mounting and almost invisible laying of the connection cable. In this actuator, the torque tube is extended and retracted by the internal spindle with a force of 1,000 N.Low space requirement with powerThe linear actuator EA-L-1000 / 750-02 has only a small diameter. Nevertheless, this actuator does not have to do without its power. With a force of 1,000 N, the torque tube is retracted and extended over a stroke length of 750 mm.
An integrated electronic overload cut-off monitors the power consumption of the linear actuator and shuts it off in case of overload. After an overload circuit, the respective potential is switched from “S” to the follower contact “F”, i. e. in on “+” and in on “-“.Your benefits at a glance:Maximum power despite small diameterInvisible laying of the connecting cableFlexible fastening technologyIntegrated overload cut-offForce of 1,000 NFlexible bracket setsUnder the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.
| Brand Name | SIMON PROtec |
|---|
