Slit actuator EA-L/S-750/300-S

Slit actuator EA-L/S-750/300-S

Electromechanical slit actuator, type EA-L/S-750/300-STested to DIN EN 12101-2. Voltage 24 V DC, rated current 1.3 A, nominal force 750 N, IP 20, switch-on duration 30%, running speed at nominal load 8.4 mm / s, integrated electronic overload cut-off and potential advance “F”, as well as built-in position-independent stop damping, in continuous aluminum Profile tube, housing anodized E6 / EV1, with cable entry on the motor housing cover, incl. 3.0 m silicone connection cable SIHF 3 x 0.75 mm², light gray, integrated housing for flexible console system in the motor housing. Overall length of motor housing: Stroke + 284 mm + 20 mm (cable insert), Stroke 285 mm, incl. Rear bearing, Type HK-L and setting angle, Type AW-80-S.

£412.10

Description

The slit actuator, type EA-L/S-750/300-S, in combination with a glass louvre TG-24 (RWA), is considered to be an excellent solution both in the SHE range and as a supply air system. Modified especially for louvre windows, large opening widths can be achieved even with small stroke lengths. In addition to the automatic shutdown, the integrated electronics also take over a torque control by monitoring current consumption to the force curve.SHE actuator for bottom hung wings and rotary wingsThe slit actuator is also suitable for bottom hung wings and rotary wings after technical examination. For adequate window locking, it is recommended that the slit actuator be combined with a ZVE-UNI-I / A auxiliary electrical lock. As a synchro actuator, it can be used in pairs on SHE openings.Your benefits at a glance:Synchro actuatorunique opening kinematics via deployment angle60° opening within the soffit – also possible over 140° openingfor inward and outward opening bottom hung wings and rotary wingsintegrated electronic overload cut-offintegrated safety shutdowncan be combined with additional electrical locking ZVE-UNI-I / AUnder the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.

Additional information

Brand Name

SIMON PROtec