Linear actuator EA-L-500/1000-S
24 V DC / 1.2 A / 500 N / 1000 mm stroke / Synchronous actuatorThe linear actuator EA-L is an electromechanical actuator for opening and closing windows and flaps. The movement is linear via a spindle thrust tube. The actuator is located in an aluminum tube with an integrated multifunctional groove for individual fastening and concealed cable routing. The electronic load cut-off with microcontroller is integrated in the actuator and thus prevents an overload in the end positions. End position detection and feedback via potential controlled F-contact. Tested according to DIN EN 12101-2 for SHEV application with retriggering blockage. Each actuator maintains the same operating speed under any load. This allows up to four actuators to run synchronously. In case of overload of one of the interconnected actuators, the whole actuator group is switched off.Technical data:
Rated voltage: 24 V DC /±15%
Rated current: 1.2 A
Switch-on duration: 30% (ON: 3 min / OFF: 7 min)
Push force: 500 N
Pulling force: 500 N
Nominal locking force: 600 N
Stroke length: 1000 mm
Running speed: 7.4 mm/s
Protection class: IP54
Temperature range: -5°C to +75°C
Housing: aluminium profile tube anodized in EV1
Housing type: Aluminium
Connection cable: silicone cable 5 x 0.75 mm², light gray, length 3,000 mm
Dimensions (LxWxH): 1363 x 36 x 42 mm
Sound level: < 70 dB (A)
Weight: 3.55 kgOptions:
– Coating according to RAL or DBManufacturer:
SIMON PROtec Systems GmbH
Type: Linear actuator EA-L-500/1000-S
Article number: M2 1704 S
£357.50
The linear actuator EA-L-500/1000-S is a synchro actuator, which is particularly distinguished by its stability. In this actuator, the motor is housed in a special aluminum tube with integrated multifunction groove. As a result, a flexible attachment and an almost invisible installation of the connection cable is possible.More power with more safetyThe torque tube is moved in and out of this actuator via an internal spindle with a force of 500 N in the thrust direction. An integrated electronic overload cut-off monitors the power consumption of the actuator and switches it off in case of overload.Integrated synchronization control for synchronous operationThe integrated synchronization control forces a synchronous operation of two, three or four electromechanical, variable-speed linear actuators. At the same time, it serves for the uniform opening of large or unstable flaps. If one of the interconnected actuators overloads, a connecting core will shut off the actuator group (combination of up to a maximum of four).Your benefits at a glance:Maximum power despite small diameterInvisible laying of the connecting cableFlexible fastening technologyIntegrated overload cut-offForce of 500 NFlexible bracket setsUnder the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.
| Brand Name | SIMON PROtec |
|---|
