Linear actuator EA-L-500/300-S
24 V DC / 1.2 A / 500 N / 300 mm stroke / Synchronous actuatorThe linear actuator EA-L is an electromechanical actuator for opening and closing windows and flaps. The movement is linear via a spindle thrust tube. The actuator is located in an aluminum tube with an integrated multifunctional groove for individual fastening and concealed cable routing. The electronic load cut-off with microcontroller is integrated in the actuator and thus prevents an overload in the end positions. End position detection and feedback via potential controlled F-contact. Tested according to DIN EN 12101-2 for SHEV application with retriggering blockage. Each actuator maintains the same operating speed under any load. This allows up to four actuators to run synchronously. In case of overload of one of the interconnected actuators, the whole actuator group is switched off.Technical data:
Rated voltage: 24 V DC /±15%
Rated current: 1.2 A
Switch-on duration: 30% (ON: 3 min / OFF: 7 min)
Push force: 500 N
Pulling force: 500 N
Nominal locking force: 600 N
Stroke length: 300 mm
Running speed: 7.4 mm/s
Protection class: IP54
Temperature range: -5°C to +75°C
Housing: aluminium profile tube anodized in EV1
Housing type: Aluminium
Connection cable: silicone cable 5 x 0.75 mm², light grey, length 3,000 mm
Dimensions (LxWxH): 663 x 36 x 42 mm
Sound level: < 70 dB (A)
Weight: 1.70 kgOptions:
– Coating according to RAL or DBManufacturer:
SIMON PROtec Systems GmbH
Type: Linear actuator EA-L-500/300-S
Article number: M2 1701 S
£288.60
The EA-L-500/300-S is a linear actuator in a special aluminum tube with integrated multifunction groove. This installation allows flexible mounting and almost invisible routing of the connection cable.
About the internal spindle, the torque tube is retracted and extended. During this process, the actuator has a force of 500 N in the thrust direction. The integrated electronic load shut-off monitors the power consumption of the actuator and switches it off in the event of an overload.Synchro actuator with integrated synchronization controlThe EA-L-500/300-S is a synchro actuator with an integrated synchronization control. This synchronous control forces a synchronous operation of two, three or four electromechanical linear actuators that are speed-controlled. If one of the interconnected actuators overloads, a connecting core shuts down the actuator group (combination of up to four actuator).Please order brackets separately.Your benefits at a glance:Maximum power despite small diameterInvisible laying of the connecting cableFlexible fastening technologyIntegrated load shutdownForce of 500 NFlexible brackets setsUnder the Construction Products Regulations (CPR) it is a legal requirement to use only certified products for smoke ventilation. It is the responsibility of the installer to ensure installations meet the relevant standards. For more information see SCS Group’s Technical Bulletin.
| Brand Name | SIMON PROtec |
|---|
